|
Brownbook Section 500-1.4.5 - Sliplined Systems, Meyer, Polycrete, "Vinylester"
|
| Approved Resin |
Dow Derekane 411 vinylester |
| Approved Inner Lining |
Dow Derakane 411 vinylester, thickness sufficient to cover all aggregate and filler |
| Approved Manufacturing Plant |
Luneburg, Germany |
| Company Web Page |
http://www.meyer-polycrete.com/en/index.php
|
| Archive Lab Report |
#95-514-07, dated 10/3/1995, #96-514-20, dated 7/5/1996
|
| City of Los Angeles Public Works Approval |
7/23/1996 |
|
City of Los Angeles Design Values
|
|
|
| Compressive Strength |
MPa (psi)
|
79.3 (11,500) minimum using 39 mm (1.5") cubes |
| Wall Thickness |
SDR |
12 or thicker |
| Strength |
for 50 year design |
25% retention of initial ASTM C 301-3 Edge Bearing |
|
Reference Standards |
|
|
Approved Diameter Range: |
550 mm to 1200 mm (18" to 60") |
| Joints: |
Flush-exterior, gasketed stainless steel coupler |
| Service Connections: |
Approved mechanical saddle |
| Aggregates and Filler: |
Fully encapsulated with cured resin. |
| Coarse Aggregate: |
Nominal 12 mm (100% passing 16 mm (5/8") sieve) |
| Fine Aggregate: |
Nominal 2 mm |
| Filler: |
Quartzite powder |
Return to Sliplined Systems (179)
Page 184
|
|